Several robust metal wear parts for foundry molding plants, precision-machined and prepared for industrial use.

Precision. Performance. Longevity.

PLATE TECHNOLOGY

Made for the toughest applications

Wear parts for foundry machines

C.A.PICARD® has a long tradition of developing and producing industrial wear parts for highly abrasive and corrosive applications. Nowhere are the demands higher than in flaskless foundry molding lines, where mold chamber plates and dimensionally accurate spare parts must meet exacting standards.

Made from high-alloy materials and paired with carefully matched heat treatment, our products withstand the most demanding conditions, making them ideal for the harsh environment of a foundry. We achieve the required dimensional accuracy through high-precision straightening and grinding, which ensures a precise fit and consistent surface quality.

Precision molding systems depend on linings, shafts, cylinders, bushings, and other wear-resistant spare parts to meet the extreme quality demands of modern castings.

Chamber and Bottom/Wear Plates

Chamber Plates

Product features & performance characteristics

  • Case hardening of 62+HRC for high abrasive wear resistance
  • Precision-ground surfaces and tightest dimensional tolerances
  • Specially designed nozzles ensure optimal venting with long service life
  • Spray adapters and fixtures available for all “In-Chamber” spray systems

Bottom/Wear Plates

Product features & performance characteristics

  • Case hardening and optional hard chrome plating (76HRC) against abrasive and corrosive wear
  • Highest-precision dimensional tolerances for flatness, parallelism, and surface quality

Base plate with case hardening and optional hard chrome plating 76 HRC against abrasive and corrosive wear

AMC / PMC Wear Parts

Product features & performance characteristics

  • C.A.PICARD®’s proven wear-strip program for all AMC and PMC systems
  • Reduces sticking of casting beads – which can be easily removed without grinding
  • The strips protect the costly carrier and improve mold quality through more uniform surfaces
  • Easy installation and replacement of individual elements
  • Special carrier material significantly reduces flatness distortion under thermal influence

PMC wear strips and guide elements made of high-quality chrome steel for foundry plants

Wear Strips/Capping Strips

Product features & performance characteristics

  • Our wear-strip program improves mold guidance and reduces maintenance costs by protecting the cooling zone
  • Available in widths up to 115 mm and thicknesses up to 25 mm for all technical requirements of AMC and PMC
  • The high-quality chrome steel is corrosion-resistant and prevents sand adhesion and time-consuming cleaning
  • Self-centering fastening elements

Wear strips for AMC and PMC systems in widths up to 115 mm, chrome steel against sand adhesion

Standard clamping-rail system

Product features & performance characteristics

  • Our standard side clamps and thrust rails are produced from high-quality heat-resistant irons
  • All products are precision-machined and stress-relieved

X-Clamps and standard clamping rails made of high-quality chrome steel for AMC/PMC foundry plants

X-Clamps

Product features & performance characteristics

  • “X-Clamps” – a consistent development by C.A.PICARD® against corrosion and abrasion
  • Wear plates made of stainless chrome steel prevent sand adhesion and time-consuming cleaning
  • Exchangeable plates on the bale and roller side offer optimal protection and longer service life
  • Can be installed without readjustment compared to standard systems

X-Clamps and standard clamping rails made of high-quality chrome steel for AMC/PMC foundry plants

AMC Shop

Product features & performance characteristics

  • Our sales program covers all common AMC spare parts such as rollers, transition plates, rail straps and hydraulic and pneumatic components.

Guide Rods, Tie Rods, Bushings, Shafts and Cylinders

Guide rods, tie rods – standard, hardened, sleeves

Product features & performance characteristics

  • Optional inductive core hardening of 60+ HRC provides improved protection against impact loads and local washouts
  • Special versions with “double chrome plating” 40 µm
  • Quick-clamp nuts for fast replacement

Guide rod with sleeve made of case-hardening steel, inductively hardened for foundry molding plants

Guide bushings – one- or two-piece

Product features & performance characteristics

  • Special version of the standard guide bushing (one-piece)
  • The split design (incl. split scraper and retaining ring) allows bushing replacement without the time-consuming removal of guide rods
  • Wear-resistant, application-specific bronze material for the highest demands

Guide bushing, one- and two-piece, made of wear-resistant bronze material for foundry molding plants

Shafts and Cylinders

Product features & performance characteristics

  • Press cylinders, accumulators, core-setter shafts – the complete program for all molding systems
  • Highest quality and service life through chrome layer thicknesses up to 100 µm
  • All products are available in an inductively hardened version
  • Our exchange program and refurbishment overhauls reduce costs and inventory

Shaft or cylinder with chrome coating up to 100 µm and inductively hardened surface for foundry molding plants

Other Spare Parts

Cams

Product features & performance characteristics

  • The “perfect pair” for smooth swing-plate motion
  • Case-hardened to 62+ HRC and precision-machined
  • Available for all Disamatic® models
  • Special profiles to improve machine performance and service life (on request)
Cam spare parts hardened to 62+ HRC for smooth swing-plate motion

Sand Hopper

Product features & performance characteristics

  • Solid 5 mm welded construction in stainless special steel
  • First-class protection against abrasion, corrosion, and sand bridging
  • Additional hard chrome plating and reinforcement of the hopper outlet enables significant service-life improvements
Sand hopper made of 5 mm special steel, hard-chrome plated, against abrasion and sand bridging

Domes

Product features & performance characteristics

  • “Ni-hard” version enables considerable service-life improvements, especially under extreme conditions
  • Also in our program: seals and rings
Metal dome body with thread

Finger Plates

Product features & performance characteristics

  • “PICARD quality” in dimensional accuracy and surface finish for all 2032, 2070 and 2130 PMC lines
  • Optional hard chrome plating or ceramic coatings for extreme wear loads
Metal finger plates and precision blanks for industrial applications

Heating Plates

Product features & performance characteristics

  • First-class “PICARD quality” for flatness, parallelism and surface requirements
  • Various material grades provide the best protection for every individual application
  • Optionally available in a hard-chrome-plated version against contact corrosion
Metal heating plate with milled channels and precise bores

Pattern plate locks and tangs

Product features & performance characteristics

  • As a pre-assembled complete unit or individually
  • Hardened, exchangeable wear shoe for all Disamatic® models
  • Available for press plate, swing plate, and core setter
Pattern plate locks, CNC-machined metal parts

Your contacts

at C.A.PICARD®

Sales Plate Technology

+1 269 962-2231

sales.plate@capicard.com

Inside Sales

+1 269 962-2231

info@capicard.com

USA

C.A. Picard, Inc.
305 Hill Brady Road
Battle Creek, MI 49037

WE ARE HERE FOR YOU

Get in touch with ease

Whether by phone, email or in person - we look forward to your message.

C.A. Picard, Inc.
305 Hill Brady Road
Battle Creek, MI 49037

info@capicard.com

+1 269 962-2231

You are currently viewing a placeholder content from Google Maps. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.

More Information